7810416

This page provides complete and verified information for part number 7810416, NSN: 5340-01-150-1584

You’ll find detailed technical specifications, product attributes, condition classification, and real-time stock availability. All data is based on official records and meets industry standards for defense, aerospace, and industrial sourcing. Whether you’re performing a parts audit, validating compliance, or preparing a purchase order, this part listing supports accurate and efficient procurement.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-150-1584

Item Name Code

05072

Assigment Date

03/31/1983 (42 years ago)

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

0.595 inches minimum and 0.655 inches maximum overall width, 1.814 inches minimum and 1.826 inches maximum distance between mounting hole centers, 2.480 inches nominal overall length, 0.154 inches minimum and 0.166 inches maximum material thickness, not included cushion

Characteristics

Below are the official specifications and performance details for this part, including technical data, material composition, and compliance information.

Overall Length: 2.480 inches nominal
Overall Width: 0.595 inches minimum and 0.655 inches maximum
Material Thickness: 0.154 inches minimum and 0.166 inches maximum
Distance Between Mounting Hole Centers: 1.814 inches minimum and 1.826 inches maximum
Cushion: not included
Mounting Pad: not included
Mounting Hole Size: 0.3275 inches minimum and 0.3375 inches maximum
Distance Between Base And Inside Of Arch: 0.323 inches nominal
Inside Diameter/Arch Length: 1.125 inches nominal
Material: steel comp 1018 or steel comp 1020
Style Designator: curved arch

Related Parts & Specifications

This NSN includes a range of related parts designed for specific operational needs. Review each item below to find in-depth specifications, functional details, and guidance for correct application and replacement.

Part Number	Name
14056840	Retaining Strap
7810416	Retaining Strap

FAQs

Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for 7810416

What is the FSCG of the NSN 5340-01-150-1584?

The FSCG of the NSN 5340-01-150-1584 is 5340

Does NSN 5340-01-150-1584 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-150-1584 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-150-1584 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-150-1584 was assigned to the Federal Catalog?

It was assigned 42 years ago, on Thu, Mar 31, 1983