5990-01-097-4329

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5990 Synchros and Resolvers

National Stock Number

5990-01-097-4329

Item Name Code

15289

Assigment Date

07/11/1980 (45 years ago)

A fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also elbow, tube; and connector, multiple, fluid pressure line. Excludes:bend, soil pipe.

unable to decode body material, 1.3770 inches maximum overall length, standard round a body style, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 0.7490 inches minimum and 0.7500 inches maximum flange diameter

Characteristics

Below are the official specifications and performance details for this part, including technical data, material composition, and compliance information.

Body Material: unable to decode
Body Style: standard round a
Pilot Diameter: 0.4995 inches minimum and 0.5000 inches maximum
Overall Length: 1.3770 inches maximum
Flange Diameter: 0.7490 inches minimum and 0.7500 inches maximum
Flange Thickness: 0.0570 inches minimum and 0.0670 inches maximum
Undercut Diameter: 0.6880 inches minimum and 0.6910 inches maximum
Undercut Width: 0.0570 inches minimum and 0.0670 inches maximum
Shaft Diameter: 0.0895 inches minimum and 0.0900 inches maximum single shaft
Shaft Length: 0.3320 inches nominal single shaft
Schematic Diagram Designator: 1 rotor, 1 stator
Fragility Factor: moderately rugged
Body Size: 8
Stator Input Voltage Rating In Volts: 10.0 nominal
Stator Input Current Rating: 200.0 milliamperes nominal
Stator Input Electrical Power Rating: 2.0 watts nominal
Frequency In Hertz: 400.0 nominal
Stator Dc Resistance In Ohms: 50.00 nominal
Torque Gradient Per Angular Deg: 2250.0 millimeter-milligrams nominal
Shaft Maximum Radial Play: 0.0020 inches
Shaft End Play: 0.0020 inches minimum and 0.0050 inches maximum
Pilot Length: 0.0380 inches minimum and 0.0480 inches maximum
Mounting Surface To Terminal End Distance: 0.9820 inches maximum
Shaft Maximum Runout: 0.0010 inches
Terminal Location: rear
Shaft Slot Depth: 0.0250 inches nominal single shaft
Shaft Slot Width: 0.0200 inches nominal single shaft
Shaft Type: round, slotted single shaft
Terminal Type And Quantity: 4 wire lead

Related Parts & Specifications

This NSN includes a range of related parts designed for specific operational needs. Review each item below to find in-depth specifications, functional details, and guidance for correct application and replacement.

Part Number	Name
08-PCR-2A	Control Transformer Synchro

FAQs

Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for 5990-01-097-4329

What is the FSCG of the NSN 5990-01-097-4329?

The FSCG of the NSN 5990-01-097-4329 is 5990

Does the NSN 5990-01-097-4329 have a Schedule B code assigned?

Yes, the Schedule B code is 9014900000

Does NSN 5990-01-097-4329 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5990-01-097-4329 contain precious materials?

Precious metal content is unknown

Does NSN 5990-01-097-4329 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5990-01-097-4329 was assigned to the Federal Catalog?

It was assigned 45 years ago, on Fri, Jul 11, 1980