12491776-002

Tarpaulin

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. 12491776-002, NSN 2540-01-607-3125

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

12491776-002
연방 공급 그룹
Vehicular Equipment Components
국가 재고 번호
2540-01-607-3125
품목 이름 코드
10220
배정 날짜
06/08/2012 (14년 전)

나사산이 없는 부분이 지정된 그립 길이(도금 또는 도금되지 않음)이고 직경이 1인치(25mm) 이하인 항목에 대해 특정 지름의 1/1000(0.001) 공차로 가공된 외부 나사산 조임쇠입니다. 직경이 1인치(25mm)를 초과하는 품목은 1인치(0.038mm) 이하의 15/10,000(0.0015)의 허용 오차를 가져야 합니다. 나사산의 공칭 주요 직경은 최소 섕크 직경보다 인치 (0.025mm) 최소 1,000분의 1(0.001) 낮아야 하지만, 나사산 표준, fed std h28 및/또는 기타 국가적으로 인정된 표준에서 볼 수 있듯이 적용 가능한 맞춤 등급의 최소 주요 직경보다 낮아서는 안 됩니다. 헤드는 삽입된 드라이버로 잡거나 구동하도록 설계되지 않았으며 엄지와 손가락으로 회전하도록 설계되지 않았습니다. 잠금 기능은 헤드 또는 나사산의 설계에 통합될 수 있습니다. 정밀 공차를 가지며 평방 인치당 160,000파운드(1100메가파스칼)의 최소 인장 강도를 갖는 재료로 제작된 품목의 경우 볼트, 전단을 참조하십시오. 평방 인치당 160,000파운드(1100메가파스칼) 미만의 최소 인장 강도를 가지며 정밀 공차가 없는 재료로 제작된 품목의 경우 볼트, 기계를 참조하십시오.

2438.4 millimeters nominal overall height, 2320015221859, dump truck end item identification, not included grommet, 4724.4 millimeters nominal overall length, mildew resistant and flame resistant and waterproof hazard protection feature

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

전체 길이
4724.4 millimeters nominal
전체 높이
2438.4 millimeters nominal
최종 품목 식별
2320015221859, dump truck
기타 제품
not included
위험 보호 기능
mildew resistant and flame resistant and waterproof
셰이드 소스(Shade Source)
federal standard 595
피복 무게
18.0 ounces per square yard nominal
통제 기관에서 할당한 부품 이름
cover,debris, 10 ton dump
특별 기능
rubber stamp manufacturer's cage & part number
색상
tan
특수 표시
this end forward
테스트 데이터 문서
"mil-prf-20696 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
4 - Partial descriptive item identification (type 1 concept)
Automatic Data Processing Point
0 - Represents items with no adp components
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
T23700
Precious Metals Indicator
A - Item does not contain precious metal.
Pseudo Item Name Code
0010220
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8708998175

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
CD
National Motor Freight Classification Item Number
181990
National Motor Freight Classification Sub-Item Number
Z
Uniform Freight Classification Item Number
31420
National Motor Freight Class Rating
W - Rating variable
Water Commodity
740 - Tarpaulins
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
VZ -
National Motor Freight Description
tarpaulin/cover/etc viz:

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. 12491776-002

What is the FSCG of the NSN 2540-01-607-3125?
The FSCG of the NSN 2540-01-607-3125 is 2540
Does the NSN 2540-01-607-3125 have a Schedule B code assigned?
Yes, the Schedule B code is 8708998175
Does NSN 2540-01-607-3125 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 2540-01-607-3125 contain precious materials?
Item does not contain precious metal.
Does NSN 2540-01-607-3125 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 2540-01-607-3125 was assigned to the Federal Catalog?
It was assigned 14년 전, on Fri, Jun 8, 2012

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

P644X5066
7643-01-717-8941
Topographic Geospatial Products
P644X5165
7643-01-717-9215
Topographic Geospatial Products
P644X5363
7643-01-717-9266
Topographic Geospatial Products
P644X5464
7643-01-717-8897
Topographic Geospatial Products
P644X5563
7643-01-717-9134
Topographic Geospatial Products
P644X6286
7643-01-717-9246
Topographic Geospatial Products
P644X6386
7643-01-717-9237
Topographic Geospatial Products
P644X6476
7643-01-717-9135
Topographic Geospatial Products
P644X6478
7643-01-717-9254
Topographic Geospatial Products
P644X6479
7643-01-717-9253
Topographic Geospatial Products
P644X6575
7643-01-717-9023
Topographic Geospatial Products
P645
4710-00-399-2867
Gage Tube
P645-72ESS
3020-00-729-6687
Spur Gear
P64501
5910-00-712-6945
Paper Dielectric Fixed Capacitor
P6451
6625-01-151-5699
Test Lead