CW15A122K

Ceramic Dielectr Fixed Capacitor

Diese Seite enthält vollständige und verifizierte Informationen zur Teilenummer CW15A122K, NSN 5910-00-096-5160

Hier finden Sie detaillierte technische Spezifikationen, Produktattribute, Zustandsklassifizierung und Lagerverfügbarkeit in Echtzeit. Alle Daten basieren auf offiziellen Aufzeichnungen und entsprechen den Industriestandards für Verteidigung, Luft- und Raumfahrt und industrielle Beschaffung. Ganz gleich, ob Sie ein Teileaudit durchführen, die Compliance validieren oder eine Bestellung vorbereiten, diese Teileliste unterstützt eine genaue und effiziente Beschaffung.

CW15A122K
Federal Supply Group
Electrical and Electronic Equipment Components
Bundesversorgungsklassifizierung
5910 Kondensatoren
Nationale Lagernummer
5910-00-096-5160
Artikelbezeichnung Code
00007
Zuweisungsdatum
12/24/1972 (vor 53 Jahren)

Ein Kondensator, dessen Kapazitätswert nicht eingestellt oder variiert werden kann, mit einem keramischen Dielektrikum. Es kann sich um eine einzelne Einheit handeln oder aus zwei oder mehr festen Einheiten bestehen, die nicht getrennt werden können.

1.250 inches minimum terminal length, w/o mtg facilities terminal(s) on one surface body style, established reliability indicator, 0.0010 reliability failure rate level in percent, 0.190 inches nominal body length

Charaktereigenschaften

Nachfolgend finden Sie die offiziellen Spezifikationen und Leistungsdetails für dieses Teil, einschließlich technischer Daten, Materialzusammensetzung und Konformitätsinformationen.

Karosserieform
w/o mtg facilities terminal(s) on one surface
Zuverlässigkeits-Indikator
established
Zuverlässigkeit Ausfallrate in Prozent
0.0010
Länge der Klemme
1.250 inches minimum
Korpuslänge
0.190 inches nominal
Korpusbreite
0.190 inches nominal
Körpergröße
0.090 inches nominal
Abstand von Mitte zu Mitte zwischen Klemmen parallel zur Länge
0.185 inches minimum and 0.215 inches maximum
Durchmesser der Klemme
0.025 inches nominal
Schematisches Diagramm Designator
no common or grounded electrode(s)
Isolationswiderstand bei maximaler Betriebstemperatur
10000.0 megohms
Kapazitätswert pro Abschnitt
1200.000 picofarads single section
Spannungstemperaturgrenzen pro Abschnitt in Prozent Kapazitätsänderung
-25.0 to 15.0 with rated voltage applied single section
Nicht degradierte Betriebstemperatur
-55.0 celsius minimum and 125.0 celsius maximum
Nicht leistungsschwache Dauerspannung und Typ pro Abschnitt
100.0 dc single section
Toleranzbereich pro Querschnitt
-10.00 to 10.00 percent single section
Isolationswiderstand bei Referenztemperatur
100000.0 megohms
Verlustfaktor bei Referenztemperatur in Prozent
2.5000
Oberflächenbehandlung der Endstation
solder
Material
plastic case
Testdatendokument
"81349-mil-c-39014 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Anschlusstyp und Menge
2 uninsulated wire lead
Spezifikation/Standarddaten
81349-mil-c-39014/1 government specification

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A010B0
Precious Metals Indicator
U - Precious metal content is unknown
Pseudo Item Name Code
0000007
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8532290040

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061400
National Motor Freight Classification Sub-Item Number
X
Uniform Freight Classification Item Number
34450
National Motor Freight Class Rating
P - 77.5
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
condensers/parts noi/capacitors

Häufig gestellte Fragen

Erhalten Sie Einblicke in Installationsverfahren, Betriebsbedingungen, Pflegeanweisungen, Branchenvorschriften und häufige Probleme. Die folgenden FAQs enthalten wichtige Informationen für CW15A122K

What is the FSCG of the NSN 5910-00-096-5160?
The FSCG of the NSN 5910-00-096-5160 is 5910
Does the NSN 5910-00-096-5160 have a Schedule B code assigned?
Yes, the Schedule B code is 8532290040
Does NSN 5910-00-096-5160 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5910-00-096-5160 contain precious materials?
Precious metal content is unknown
Does NSN 5910-00-096-5160 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5910-00-096-5160 was assigned to the Federal Catalog?
It was assigned vor 53 Jahren, on Sun, Dec 24, 1972

Benötigen Sie Verbrauchsmaterialien?

Gehen die lebenswichtigen Vorräte zur Neige? Entdecken Sie unseren umfangreichen Katalog an hochwertigen Verbrauchsmaterialien, die entwickelt wurden, um Ihren Betrieb auf Kurs zu halten.

Electrical Wires

Für Sie empfohlen

Entdecken Sie eine Auswahl weiterer stark nachgefragter NSN-Komponenten aus unserem Katalog. Diese vorgestellten Teile werden häufig von Beschaffungsteams in den Bereichen Verteidigung, Luft- und Raumfahrt und Industrie beschafft.

Preis & Verfügbarkeit

Füllen Sie das Formular aus, um genaue Preise, Vorlaufzeiten und Lagerbestandsdetails von unseren NSN-Spezialisten zu erhalten:

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

Beliebte Teile

Stöbern Sie in unseren leistungsstärksten Teilen, die auf der Grundlage der Kundennachfrage und der Beschaffungshäufigkeit ausgewählt werden. Alle Angebote enthalten aktuelle Spezifikationen, Verfügbarkeit und Zustand:

859D10090
1680-00-895-8046
Seat Fitting
859D10090-10
1680-00-895-8056
Seat Fitting
859D10090-5
5365-01-569-7126
Straight Spacer
859D10090-7
5340-01-567-1852
Pad Eye
859D10090-8
5340-01-567-1877
Pad Eye
859D10090-9
1680-00-895-8046
Seat Fitting
859D10092-1
1680-00-942-2067
Cutboard End Shroud
859D10092-2
1680-00-942-2068
Outboard End Shroud
859D10092-611
1680-01-566-4005
Outboard Shroud
859D10092-612
1680-00-942-2068
Outboard End Shroud
859D10095-1
4710-01-565-6438
Metallic Bent Tube
859D10095-2
4710-01-565-6442
Metallic Bent Tube
859D10097-1
3040-01-566-6786
Rigid Connecting Link
859D10137-5
1680-00-019-8178
Floor Attaching Bar
859D10138-1
1680-00-867-2129
Seat Fitting