1. Home /
  2. Catalog /
  3. Capacitors /
  4. 5910-01-228-8528

5910-01-228-8528

Electrolytic Fixed Capacitor

Find complete technical information, availability, and procurement data for NSN 5910-01-228-8528 All details are based on official government and industry records to support accurate and compliant procurement.

5910-01-228-8528
Federal Supply Group
Electrical and Electronic Equipment Components
Federal Supply Classification
5910 Capacitors
National Stock Number
5910-01-228-8528
Item Name Code
00008
Assigment Date
03/22/1986 (40 years ago)

A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

0.425 inches maximum body length, not established reliability indicator, w/o mtg facilities, terminal(s) on one end body style, 0.187 inches nominal terminal length, 0.175 inches maximum body diameter

Characteristics

Below are the official specifications and performance details for this part, including technical data, material composition, and compliance information.

Body Style
w/o mtg facilities, terminal(s) on one end
Reliability Indicator
not established
Terminal Length
0.187 inches nominal
Body Diameter
0.175 inches maximum
Body Length
0.425 inches maximum
Center To Center Distance Between Terminals Parallel To Diameter
0.125 inches nominal
Terminal Diameter
0.020 inches nominal
Schematic Diagram Designator
no common or grounded electrode(s)
Anode Type
solid
Electrical Polarization
polarized
Capacitance Value Per Section
0.150 microfarads single section
Nonderated Operating Temp
-55.0 celsius minimum and 85.0 celsius maximum
Nonderated Continuous Voltage Rating And Type Per Section
50.0 dc single section
Tolerance Range Per Section
-10.00 to 10.00 percent single section
Capacitive Electrode Material
tantalum
Dissipation Factor At Reference Temp In Percent
4.0000
Dc Leakage At Reference Temp
1.000 microamperes
Terminal Surface Treatment
solder
Material
plastic case
Test Data Document
"81349-mil-c-49137 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Terminal Type And Quantity
2 uninsulated wire lead
Specification/Standard Data
81349-mil-c-49137/2 government specification

Replaces National Stock Numbers

Below is a list of NSNs that have been officially replaced by the NSN 5910-01-228-8528

NSN Name Date
5910-00-601-6229 No Name Available 04/30/2008
5910-01-114-0637 No Name Available 11/09/2007

Related Parts & Specifications

This NSN includes a range of related parts designed for specific operational needs. Review each item below to find in-depth specifications, functional details, and guidance for correct application and replacement.

Part Number Name
196D154X9035HA1 Electrolytic Fixed Capacitor
196D154X9050HA1 Electrolytic Fixed Capacitor
CX12N154K Electrolytic Fixed Capacitor
T368A154K035AS Electrolytic Fixed Capacitor

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A010B0
Precious Metals Indicator
A - Item does not contain precious metal.
Pseudo Item Name Code
0000008
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8532290040

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061400
National Motor Freight Classification Sub-Item Number
X
Uniform Freight Classification Item Number
34450
National Motor Freight Class Rating
P - 77.5
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
condensers/parts noi/capacitors

FAQs

Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for 5910-01-228-8528

What is the FSCG of the NSN 5910-01-228-8528?
The FSCG of the NSN 5910-01-228-8528 is 5910
Does the NSN 5910-01-228-8528 have a Schedule B code assigned?
Yes, the Schedule B code is 8532290040
Does NSN 5910-01-228-8528 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5910-01-228-8528 contain precious materials?
Item does not contain precious metal.
Does NSN 5910-01-228-8528 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5910-01-228-8528 was assigned to the Federal Catalog?
It was assigned 40 years ago, on Sat, Mar 22, 1986

Need Consumables?

Running low on essential supplies? Explore our extensive catalog of high-quality consumables designed to keep your operations on track.

Electrical Wires

Recommended for You

Discover a selection of other high-demand NSN components from our catalog. These featured parts are frequently sourced by procurement teams across defense, aerospace, and industrial sectors.

Price & Availability

Fill out the form to get accurate pricing, lead time, and stock details from our NSN specialists:

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

Popular Parts

Browse our top-performing parts, selected based on customer demand and procurement frequency. All listings include up-to-date specs, availability, and condition:

LTCT9207-01
3120-00-855-8032
Rod End Plain Bearing
LTCT9249-01
4820-00-580-2200
Check Valve
LTCT9260
5998-00-079-8822
Electronic Components Assembly
LTCT9261
3455-00-943-2345
Milling Carb Cutter
LTCT9262
5920-00-955-9392
Cartridge Fuse
LTCT9263
5120-00-886-1794
Spanner Wrench
LTCT9264
5977-00-955-9484
Electrical Contact Brush Holder
LTCT9266
2940-00-924-3620
Ai Strainer Element
LTCT9269
4920-00-011-8910
Test Adapter
LTCT9277
6150-00-011-8938
Electr Lead and Conduit Assembly
LTCT9277-01
6150-00-011-8938
Electr Lead and Conduit Assembly
LTCT9280
5935-00-448-9583
Connector Adapter
LTCT9281
6625-00-590-6502
Special Scale Meter
LTCT9282
6695-00-937-0270
Motional Pickup Transducer
LTCT9283-01
6150-00-981-5089
E Special Purpose Cable Assembly