2006014-1
Nut,plain,cone Seat,hexagon
This page provides complete and verified information for part number 2006014-1, NSN 5310-01-059-1963
You’ll find detailed technical specifications, product attributes, condition classification, and real-time stock availability. All data is based on official records and meets industry standards for defense, aerospace, and industrial sourcing. Whether you’re performing a parts audit, validating compliance, or preparing a purchase order, this part listing supports accurate and efficient procurement.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.
right-hand thread direction, 0.311 inches minimum and 0.318 inches maximum drilled hole diameter, cone seat, hexagon nut style, 0.720 inches nominal nut height, 3b thread class
Characteristics
Below are the official specifications and performance details for this part, including technical data, material composition, and compliance information.
- Thread Class
- 3b
- Thread Direction
- right-hand
- Nut Style
- cone seat, hexagon
- Nut Height
- 0.720 inches nominal
- Drilled Hole Diameter
- 0.311 inches minimum and 0.318 inches maximum
- Hole Type And Quantity
- 6 drilled
- Width Across Flats
- 2.105 inches minimum and 2.125 inches maximum
- Thread Series
- unjef
- Thread Quantity Per Inch
- 18
- Nominal Thread Size
- 1.625 inches
- Cone Seat Angle
- 120.00 degrees nominal
- Hole Configuration Style
- configuration a
- Material
- steel comp 4140 overall
- Material Document And Classification
- mil-s-5626,cond e4 mil spec single material response overall
- Surface Treatment
- cadmium overall except bearing surface
- Surface Treatment Document And Classification
- qq-p-416,type ii,class 2 fed spec single treatment response overall except bearing surface
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- Schedule B Code
- K - Full descriptive - reference item identification
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
- A021A0
- U - Precious metal content is unknown
- 0005282
- N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- 7318160000
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- National Motor Freight Classification Item Number
- National Motor Freight Classification Sub-Item Number
- Uniform Freight Classification Item Number
- National Motor Freight Class Rating
- Water Commodity
- Type of Cargo
- Special Hand
- Air Dimension
- Air Commodity
- National Motor Freight Description
- SU
- 093486
- Z
- 48950
- W - Rating variable
- 576 - Metal and metal products, nos, (less than 35 feet)
- Z - No special type of cargo code applicable
- 9 - Other or no special handling required (sh)
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- BZ -
- bolts,nuts or screws, noi (sub 3)
FAQs
Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for 2006014-1
What is the FSCG of the NSN 5310-01-059-1963?
Does the NSN 5310-01-059-1963 have a Schedule B code assigned?
Does NSN 5310-01-059-1963 require demilitarization?
Does NSN 5310-01-059-1963 contain precious materials?
Does NSN 5310-01-059-1963 contain hazardous materials?
When the NSN 5310-01-059-1963 was assigned to the Federal Catalog?
Need Consumables?
Running low on essential supplies? Explore our extensive catalog of high-quality consumables designed to keep your operations on track.
Recommended for You
Discover a selection of other high-demand NSN components from our catalog. These featured parts are frequently sourced by procurement teams across defense, aerospace, and industrial sectors.
Price & Availability
Fill out the form to get accurate pricing, lead time, and stock details from our NSN specialists:
