SM-C-780258-1

Radio Frequency Interfere Filter

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. SM-C-780258-1, NSN 5915-01-091-1869

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

SM-C-780258-1
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5915 필터 및 네트워크
국가 재고 번호
5915-01-091-1869
품목 이름 코드
00765
배정 날짜
03/03/1980 (46년 전)

원하지 않는(간섭) 주파수를 억제하고 전력 회로에 삽입될 때 원하는 주파수에 미치는 영향을 최소화하도록 설계된 항목입니다. 제외 : 단일 커패시터, 인덕터, 저항기 또는 동일한 기본 이름의 두 개 이상의 회로 소자로만 구성된 장치로 구성된 항목. 제외: 필터, 저역 통과 및 억제기, 점화 간섭. 안테나 인입과 같이 주로 신호로 변조된 고주파를 전달하기 위한 라인에 삽입되도록 설계된 항목에 대해서는 filter, band suppression 및 filter, band pass를 참조하십시오. 리미터, 전기 노이즈 참조.

1.718 inches nominal overall length, 0.577 inches maximum body outside diameter, -35.0 to 85.0 celsius operating temp range, 1.000 inches nominal body length, 50.0 ohms blank source impedance rating per function

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

전체 길이
1.718 inches nominal
본체 길이
1.000 inches nominal
본체 외경
0.577 inches maximum
작동 온도 범위
-35.0 to 85.0 celsius
기능 당 근원 임피던스 등급
50.0 ohms blank
짐 임피던스 기능 당
50.0 ohms blank
Amps에 있는 기능 당 작동 현재 등급
0.0001 blank
최대 임시 직원 상승
20.0 celsius
설치 시설 나사 스레드 시리즈 Designator
unf
관련 상품
encased
설치 시설 유형과 양
1 threaded bushing
기능적인 맨끝 유형과 양
1 tab, solder lug ground 3rd function
기능적인 맨끝 유형과 양
1 tab, solder lug input 1st function
기능적인 맨끝 유형과 양
1 tab, solder lug output 2nd function
작동 전압 등급 및 기능 당 유형
100.0 volts dc blank
공칭 나사 크기
0.312 inches
몸 물자
metal
스타일 지정자
round terminal/terminals on opposite surfaces

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A047B0
Precious Metals Indicator
U - Precious metal content is unknown
Pseudo Item Name Code
0000765
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8527995030

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061990
National Motor Freight Classification Sub-Item Number
X
Uniform Freight Classification Item Number
58500
National Motor Freight Class Rating
P - 77.5
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
electrical equip:filters

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. SM-C-780258-1

What is the FSCG of the NSN 5915-01-091-1869?
The FSCG of the NSN 5915-01-091-1869 is 5915
Does the NSN 5915-01-091-1869 have a Schedule B code assigned?
Yes, the Schedule B code is 8527995030
Does NSN 5915-01-091-1869 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5915-01-091-1869 contain precious materials?
Precious metal content is unknown
Does NSN 5915-01-091-1869 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5915-01-091-1869 was assigned to the Federal Catalog?
It was assigned 46년 전, on Mon, Mar 3, 1980

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

D-701 3X5/16X1
3455-00-194-0517
Plain Milling Cutter
D-701 3X5/8X1-1/4
3455-00-194-0520
Plain Milling Cutter
D-701 4X5/8X1-1/4
3455-00-194-0534
Plain Milling Cutter
D-701 DEVELOPER (SEE SUPPL DATA)
6850-00-826-0981
Inspection Penetrant Kit
D-701006
6665-01-305-2801
Chemical Agent Automa Alarm Unit
D-701006 ITEM 28
5998-01-312-3311
Electronic Components Assembly
D-701006 ITEM 8
5330-01-312-6990
Gasket
D-701007
6665-01-304-8187
Chemical Agent Automa Alarm Unit
D-701007 ITEM 10
5998-01-311-4493
Electronic Components Assembly
D-701007 ITEM 5
5330-01-312-6991
Gasket
D-701007 ITEM 7
5330-01-312-6992
Gasket
D-701013 ITEM 10
5950-01-311-5377
Power Transformer
D-701169 ITEM 4
5998-01-311-4558
Circuit Card Assembly
D-701169 ITEM 5
5998-01-311-4559
Circuit Card Assembly
D-701182
6665-01-294-2556
Chemical Agent Detector