SCM718F

Memory Microcircuit

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. SCM718F, NSN 5962-00-176-2742

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

SCM718F
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5962 전자 현미경
국가 재고 번호
5962-00-176-2742
품목 이름 코드
41015
배정 날짜
02/24/1973 (53년 전)

0.030 inches minimum and 0.075 inches maximum body height, 0.265 inches minimum and 0.325 inches maximum body width, 625.0 milliwatts maximum power dissipation rating, 0.340 inches minimum and 0.440 inches maximum body length, +0.0 to 75.0 celsius operating temp range

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

본체 길이
0.340 inches minimum and 0.440 inches maximum
몸 폭
0.265 inches minimum and 0.325 inches maximum
몸 고도
0.030 inches minimum and 0.075 inches maximum
최대 힘 Dissipation 등급
625.0 milliwatts
작동 온도 범위
+0.0 to 75.0 celsius
보관 온도 범위
-65.0 to 150.0 celsius
최종 품목 식별
58404091248
제공되는 기능
hermetically sealed and monolithic and negative outputs and positive outputs and w/enable and programmable and programmed and bipolar and w/buffered output and w/decoded output and expandable and wire-or outputs
인클로저 재료
ceramic and glass
설정 설치
flat pack
Output Logic Form
transistor-transistor logic
입력 회로 패턴
6 input
끝 표면 처리
solder
전압 등급과 유형 특성 당
5.5 volts maximum power source
Chacteristic당 시간 등급
50.00 nanoseconds maximum propagation delay time, low to high level output
메모리 장치 제품정보
rom
테스트 데이터 문서
05869-717383 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
끝 유형과 양
16 flat leads

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
M - Partial descriptive - reference item identification (type 1a concept)
Demilitarization
Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A458A0
Precious Metals Indicator
U - Precious metal content is unknown
Pseudo Item Name Code
0041015
Hazardous Material Indicator
N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Schedule B Code
8542900000

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061045
National Motor Freight Classification Sub-Item Number
Z
Uniform Freight Classification Item Number
34580
National Motor Freight Class Rating
W - Rating variable
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
3 - Electrostatic sensitive device (esd)
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
boards printed circuit elec

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. SCM718F

What is the FSCG of the NSN 5962-00-176-2742?
The FSCG of the NSN 5962-00-176-2742 is 5962
Does the NSN 5962-00-176-2742 have a Schedule B code assigned?
Yes, the Schedule B code is 8542900000
Does NSN 5962-00-176-2742 require demilitarization?
"commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
Does NSN 5962-00-176-2742 contain precious materials?
Precious metal content is unknown
Does NSN 5962-00-176-2742 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 5962-00-176-2742 was assigned to the Federal Catalog?
It was assigned 53년 전, on Sat, Feb 24, 1973

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

9379J4278 PIECE 2L1
4330-01-468-9009
Fluid Filter Body
9379J4278 PIECE 4
4730-01-468-9002
Union Thread Piece
9379J4278 PIECE 4L1
4730-01-468-9002
Union Thread Piece
9379J4278 PIECE 5
5365-01-468-9033
Machine Thread Plug
9379J4278 PIECE 5L1
5365-01-468-9033
Machine Thread Plug
9379J4278 PIECE 8
4330-01-453-0973
Filter Baffle Assy
9379J4278 PIECE 9
4730-01-468-9032
Union Tailpiece
9379J4278 PIECE 9L1
4730-01-468-9032
Union Tailpiece
9379J4278L1
4330-01-468-9011
Fluid Filter
9379M27P01
5315-01-531-6608
Threaded Tapered Pin
9379M29P02
5365-01-531-6575
Plate Spacer
9379M41G05
2835-01-125-1821
Stg1 Vn Shroud Assy
9379M41G09
2840-01-708-3847
Aircraft Turbine Shroud Segment
9379M42G04
2835-01-125-1822
Turbine Vane Shroud
9379M92P01
5315-01-455-7637
Headless Shoulder Pin